Pulling & Setting Submersible Pumps
B&M Pump and Irrigation Sales & Service, Inc. will pull any damaged pump. We can rebuild or replace the pump, so that we can have your pump ready to set back into the well as soon as possible so you may continue to use your well as needed. We strive to serve our customers with the courtesy and respect they deserve. We will install your pump with the type of pipe you desire; whether your preference is steel pipe, PVC pipe or poly pipe, we have what you need in stock, or we can order it for you. If you are unsure of the type of pipe that would be best for you, we will find the best selection to fit your application. If you’re in Seminole or Gaines County, TX, or anywhere else in the state of Texas, contact us today!
Test Pumping
If you have a newly drilled well and not sure how much water you have to set a pump. B&M Pump Irrigation has the equipment to set a test pump and will measure exactly how many gallons per minute with pressure.
Air Jetting
Sand is the most common distress factor in pumps; it can severely damage your pump so you would need extensive repair, or as in some cases, complete destruction of the pump. If you have this problem air jetting your well make a huge difference in how long your pump will last.